MoldIdentificationLayout
Sample Distribution Charts
Color Distribution
Material Distribution
Origin Distribution
| Photo | Generation | Molds | PipStyle | BottomStyle | InsideLogoOrientation | InsideLogoStyle | InsideRibStyle | MoldPositionLayout | MoldPositionStyle | PatPendLayout | PatPendStyle | StudLogoStyle | StudRecessStyle |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
01 - Automatic Binding Bricks | 2 | Single Cornered Narrow Bottom Edge | None | None | None | Lengthwise | None | None | None | None | None | None |
 |
02 - Large logo - lengthwise ribs | 1 | Single Cornered Narrow Bottom Edge | None | Left To Right | Bold Blockletters | Lengthwise | None | None | None | None | None | None |
 |
03 - Large logo - ribs across | 7 | Single Cornered Narrow Bottom Edge | None | Left To Right | Blockletters | Across | None | None | None | None | None | None |
 |
04 - Dogbone | 9 | Single Cornered Narrow Bottom Edge | None | Top To Bottom | Dogbone | None | Left (Bottom To Top) | Typed | None | None | None | None |
 |
05 - Tubeless - Logo inside | 11 | Centered Narrow Bottom Edge | None | Left To Right | Blockletters | Across | None | None | None | None | None | Large (3mm) |
 |
06 - Full stud - with stud logo | 13 | Centered Narrow Bottom Edge | None | None | None | Spotted | Center (Top To Bottom) | Typed | None | None | Wide Straight 'O' | None |
 |
09 - Other parts - no logo | 6 | Mixed Narrow Top Edge | Waffles | Left To Right | Dogbone | None | None | None | None | None | None | None |
 |
11 - Tubeless - No logo inside - corner pip | 25 | Single Cornered Narrow Bottom Edge | Cross-support | None | None | Mixed | Right (Bottom To Top) | Typed | None | None | Wide Straight 'O' | Large sloped (3mm) |
 |
12 - Tubeless - No logo inside - wide center pip | 4 | Centered Wide Bottom Edge | None | None | None | Across | Left (Bottom To Top) | Typed | None | None | Wide Straight 'O' | Large sloped (3mm) |
 |
13 - Tubeless - No logo inside - other pips | 3 | Centered Narrow Bottom Edge | None | None | None | Across | Center (Bottom To Top) | Typed | None | None | Wide Straight 'O' | Large (3mm) |
| 19 - Other parts - logo on studs | 16 | Mixed Narrow Top Edge | Waffles | Left To Right | Dogbone | None | Left + Right | Typed | None | None | Wide Straight 'O' | Large (3mm) | |
| 20 - Old logo - 3mm stud recess - center pip | 14 | Centered Wide Bottom Edge | Tubes Without Cross-support | None | None | None | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Large (3mm) | |
| 21 - Old logo - 3mm stud recess - corner-pip | 38 | Double Cornered Narrow Bottom Edge | Cross-support | None | None | None | None | None | None | None | Wide Straight 'O' | Large (3mm) | |
| 22 - Old logo - 3mm stud recess - other pips | 1 | Stud | Tubes With Cross-support | None | None | None | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Large (3mm) | |
| 23 - Old logo - smaller stud recess - corner-pip - no mold-id | 36 | Double Cornered Narrow Bottom Edge | Cross-support | None | None | None | None | None | None | None | Wide Straight 'O' | Small (2-2,2mm) | |
 |
24 - Tall wide straight 'O' - corner pip - smaller stud recess | 12 | Double Cornered Narrow Bottom Edge | Cross-support | None | None | None | Left (Bottom To Top) | Typed | None | None | Tall Wide Straight 'O' | Small (2-2,2mm) |
 |
25 - Old logo - smaller stud recess - centered pip - no mold-id | 3 | Centered Side Surface | Tubes Without Cross-support | None | None | None | Right (Bottom To Top) | Typed | Top+Bottom (centered) | Normal | Wide Round 'O' | Small (2-2,2mm) |
| 26 - Old logo - other pips - no mold-id | 1 | Stud | None | None | None | None | Center (Circumferencial upside-down) | Typed | None | None | Wide Straight 'O' | Medium (2,3-2,5mm) | |
 |
40 - Narrow Straight 'O' without mold identifiers | 1 | Double Cornered Narrow Bottom Edge | Cross-support | None | None | None | Left (Bottom To Top) | Typed | None | None | Narrow Straight 'O' | Small (2-2,2mm) |
| 45 - Other parts - modern logo | 2 | Single Cornered Narrow Bottom Edge | None | None | None | None | None | None | None | None | Narrow Straight 'O' | Medium (2,3-2,5mm) | |
| 90 - 90-Temp 10x20 | 2 | Bottom | Cross-support | None | None | None | None | None | None | None | Modern | Large sloped (3mm) |
01 - Automatic Binding Bricks (1949-1951)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
01a | Automatic Binding Bricks | 16 / 16 | 01b (Matching pattern - extra slot added) |
 |
01b | Automatic Binding Bricks (early version) | 1 / 1 | 01a (Matching pattern - extra slot added) |
02 - Large logo - lengthwise ribs (1952-1952)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
02a | Large logo - lengthwise ribs | 16 / 16 |
03 - Large logo - ribs across (1953-1953)
| Photo | CatId | Mold | Members | InsideRibStyle | MoldPositionLayout | MoldPositionStyle | StudLogoStyle | Associations |
|---|---|---|---|---|---|---|---|---|
 |
03a | Hatched bricks | 18 / 18 | Across | None | None | None | 03b (Matching surface pattern),03c (Matching pattern (f-1 rotated 180 deg.)) |
 |
03b | Numbered bricks | 18 / 18 | Across | Top | Hand-written | None | 03a (Matching surface pattern),03c (Matching pattern (f-1 rotated 180 deg.)),03i (Matching pattern - hand-written number identical) |
 |
03c | Hatched bricks - inverted | 2 / 2 | Across | None | None | None | 03b (Matching pattern (f-1 rotated 180 deg.)),03a (Matching pattern (f-1 rotated 180 deg.)) |
 |
03d | With slots | 8 / 8 | Spotted | Top right corner (Top To Bottom) | Typed | None | 03e (Matching patterns),03f (Matching patterns) |
 |
03e | Without slots and stud logo | 1 / 1 | Spotted | Top right corner (Top To Bottom) | Typed | None | 03d (Matching patterns),03f (Matching patterns) |
 |
03f | Without slots, but with stud logo | 4 / 4 | Spotted | Top right corner (Top To Bottom) | Typed | Wide Straight 'O' | 03d (Matching patterns),03e (Matching patterns) |
 |
03i | Numbered bricks - variant | 1 / 1 | Across | Top | Hand-written | None | 03b (Matching pattern - hand-written number identical) |
04 - Dogbone (1954-1954)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | InsideLogoOrientation | InsideLogoStyle | InsideRibStyle | MoldPositionLayout | MoldPositionStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
04a | Overlapping numbers | 16 / 16 | Single Cornered Narrow Bottom Edge | None | Top To Bottom | Dogbone | None | Left (Bottom To Top) | Typed | |
 |
04b | Non-overlapping numbers | 13 / 13 | Single Cornered Narrow Bottom Edge | None | Left To Right | Dogbone | None | Left (Bottom To Top) | Typed | |
 |
04c | Circles 2x12+2x14 | 4 / 4 | Single Cornered Narrow Bottom Edge | None | Left To Right | Dogbone | Across | None | None | |
 |
04d | Circles - 2x2 | 4 / 4 | Single Cornered Narrow Bottom Edge | None | Left To Right | Dogbone | Across | None | None | |
 |
04e | Circles 4x4 Slotted | 6 / 6 | Single Cornered Narrow Bottom Edge | None | Diagonal | Dogbone | Across | None | None | 04f (Matching top+bottom) |
 |
04f | Circles 4x4 Slots removed | 6 / 6 | Single Cornered Narrow Bottom Edge | None | Diagonal | Dogbone | Across | None | None | 04e (Matching top+bottom) |
 |
04g | 1x6+1x8 Without cross-support | 4 / 4 | Single Cornered Narrow Bottom Edge | None | Left To Right | Dogbone | None | Left (Top To Bottom) | Typed | |
 |
04h | 1x6+1x8 With cross-support | 12 / 12 | Double Cornered Narrow Bottom Edge | Cross-support | Left To Right | Dogbone | None | Left (Bottom To Top) | Typed | |
 |
04i | 1x2 Mystery Bricks #1 | 3 / 3 | Centered Narrow Bottom Edge | None | None | None | None | None | None |
05 - Tubeless - Logo inside (1955-1956)
| Photo | CatId | Mold | Members | PipStyle | InsideLogoOrientation | InsideLogoStyle | InsideRibStyle | StudLogoStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|
 |
05a | Small Blockletter - No logo on studs - first iteration | 9 / 9 | Centered Narrow Bottom Edge | Left To Right | Blockletters | Across | None | Large (3mm) | 05b (Stud ring patterns),05c (Stud ring patterns) |
 |
05b | Small Blockletter - No logo on studs - second iteration | 9 / 9 | Centered Narrow Bottom Edge | Left To Right | Blockletters | Across | None | Large (3mm) | 05a (Stud ring patterns),05c (Stud ring patterns) |
 |
05c | Small blockletter - No logo | 9 / 9 | Centered Narrow Bottom Edge | Left To Right | Blockletters | Across | None | Large (3mm) | 05a (Stud ring patterns),05b (Stud ring patterns) |
 |
05d | Small blockletter - Mixed stud-logo | 9 / 9 | Centered Medium Bottom Edge | Left To Right | Blockletters | Both | Wide Straight 'O' | Large (3mm) | |
 |
05e | Small blockletter - Mixed stud-logo | 9 / 9 | Centered Medium Bottom Edge | Left To Right | Blockletters | Mixed | Wide Straight 'O' | Large (3mm) | |
 |
05f | Small blockletter - With stud-logo | 9 / 9 | Centered Medium Bottom Edge | Left To Right | Blockletters | Mixed | Wide Straight 'O' | Large (3mm) | |
 |
05g | Small blockletter - With stud logo | 9 / 9 | Centered Wide Bottom Edge | Left To Right | Blockletters | Mixed | Wide Straight 'O' | None | |
 |
05h | Small blockletter - No slotted bricks | 9 / 9 | Centered Wide Bottom Edge | Left To Right | Blockletters | Mixed | Wide Straight 'O' | None | |
 |
05x | Early prototype mold - no logo[mystery bricks] | 1 / 1 | Centered Medium Bottom Edge | None | None | Across | Wide Straight 'O' | Large (3mm) | |
 |
05y | Early prototype mold - no stud recesses[mystery bricks] | 2 / 2 | Centered Medium Bottom Edge | Left To Right | Blockletters | Across | Wide Straight 'O' | None | |
 |
05z | Wide logo | 1 / 1 | Single Cornered Narrow Bottom Edge | None | None | Across | Wide Straight 'O' | Large (3mm) |
06 - Full stud - with stud logo (1955-1956)
| Photo | CatId | Mold | Members | PipStyle | InsideRibStyle | MoldPositionLayout | MoldPositionStyle | Associations |
|---|---|---|---|---|---|---|---|---|
 |
06a | 1x2 slotted - pip long side - no dots | 8 / 8 | Centered Narrow Bottom Edge | Spotted | Center (Top To Bottom) | Typed | |
 |
06b | 1x2 slotted - pip long side - one dot | 8 / 8 | Centered Narrow Bottom Edge | Spotted | Center (Top To Bottom) | Typed | |
 |
06c | 1x2 slotted - pip long side - two dots below | 8 / 8 | Centered Narrow Bottom Edge | Spotted | Center (Top To Bottom) | Typed | |
 |
06d | 1x2 slotted - pip long side - two dots right | 8 / 8 | Centered Narrow Bottom Edge | Spotted | Center (Top To Bottom) | Typed | |
 |
06e | 1x2 no slots - pip long side - no dots | 8 / 8 | Centered Narrow Bottom Edge | Spotted | Center (Top To Bottom) | Typed | |
 |
06f | 1x2 no slots - pip long side - one dot | 8 / 8 | Centered Narrow Bottom Edge | Spotted | Center (Top To Bottom) | Typed | |
 |
06g | 1x2 no slots - pip long side - two dots below | 8 / 8 | Centered Narrow Bottom Edge | Spotted | Center (Top To Bottom) | Typed | |
 |
06h | 1x2 no slots - pip long side - two dots right | 8 / 8 | Centered Narrow Bottom Edge | Spotted | Center (Top To Bottom) | Typed | |
 |
06i | 1x2 mixed - pip short side - weak rib | 14 / 14 | Centered Narrow Bottom Edge | Spotted | Center (Top To Bottom) | Typed | |
 |
06j | 1x2 mixed - pip short side - full rib | 14 / 14 | Centered Narrow Bottom Edge | Spotted | Center (Top To Bottom) | Typed | 06k (Slot removed) |
 |
06k | 1x2 no slots - pip short side | 1 / 1 | Centered Narrow Bottom Edge | Spotted | None | None | 06j (Slot removed) |
 |
06l | Round bricks without stud notches | 23 / 23 | Single Narrow Bottom Edge (Non-cornered/-centered) | None | Left (Left To Right) | Typed+None | 06m (Matching patterns) |
 |
06m | Round bricks with stud notches | 22 / 22 | Single Narrow Bottom Edge (Non-cornered/-centered) | None | Left (Left To Right) | Typed+None | 06l (Matching patterns) |
09 - Other parts - no logo (1955-1957)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | InsideLogoOrientation | InsideLogoStyle | MoldPositionLayout | MoldPositionStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
09A | Waffle plates without stud recess | 20 / 20 | Mixed Narrow Top Edge | Waffles | Left To Right | Dogbone | None | None | None | |
 |
09B | Waffle plates with stud recess without stud logo | 16 / 16 | Mixed Narrow Top Edge | Waffles | Left To Right | Dogbone | Left + Right | Typed | Large (3mm) | |
 |
09c | Garage Floor Plate without stud logo | 1 / 1 | Bottom | None | Left To Right | Dogbone | None | None | None | |
 |
09d | Garage Door Frame without studs - full rib for slotted bricks | 1 / 1 | Mixed Cornered Narrow Bottom Edge | None | None | None | None | None | None | |
 |
09e | Garage Door Frame without studs - winged rib for slotted bricks | 1 / 1 | Mixed Cornered Narrow Bottom Edge | None | None | None | None | None | None | |
 |
09f | Garage Door - for winged frames | 1 / 1 | None | None | Left To Right | Dogbone | None | None | None |
11 - Tubeless - No logo inside - corner pip (1956-1957)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | InsideRibStyle | MoldPositionLayout | MoldPositionStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|
 |
11a | 2x8 Single pip | 8 / 8 | Single Cornered Narrow Bottom Edge | Cross-support | Across | Left (Bottom To Top) | Typed | Large (3mm) | 11b (Matching patterns - only differs by number of pips) |
 |
11b | 2x8 Double pip | 8 / 8 | Double Cornered Narrow Bottom Edge | Cross-support | Across | Left (Bottom To Top) | Typed | Large (3mm) | 11a (Matching patterns - only differs by number of pips) |
 |
11c | Unnumbered - sloped stud recesses | 22 / 22 | Single Cornered Narrow Bottom Edge | None | Across | None | None | Large sloped (3mm) | |
 |
11d | 2x4 Centered and mirrored numbers - corner-pip | 20 / 20 | Single Cornered Narrow Bottom Edge | None | Across | Center (Bottom To Top) | Typed | Large (3mm) | |
 |
11f | 2x4 Sloped stud recesses | 20 / 20 | Single Cornered Narrow Bottom Edge | None | Across | Left (Bottom To Top) | Typed | Large sloped (3mm) | |
 |
11g | 2x4 Normal stud recesses | 20 / 20 | Single Cornered Narrow Bottom Edge | None | Across | Left (Bottom To Top) | Typed | Large (3mm) | |
 |
11h | 2x3 Sloped stud recesses | 21 / 21 | Single Cornered Narrow Bottom Edge | None | Across | Left (Bottom To Top) | Typed | Large sloped (3mm) | |
 |
11i | 2x3 Normal stud recesses | 18 / 18 | Single Cornered Narrow Bottom Edge | None | None | Left (Bottom To Top) | Typed | Large (3mm) | |
 |
11j | 2x2 Sloped stud recesses - handwritten numbers | 28 / 28 | Single Cornered Narrow Bottom Edge | None | Across | Center (Bottom To Top) | Hand-written | Large sloped (3mm) | 11k (Matching surface pattern),11l (Matching surface pattern) |
 |
11k | 2x2 Sloped stud recesses - typed weak numbers | 28 / 28 | Single Cornered Narrow Bottom Edge | None | Across | Center (Bottom To Top) | Typed | Large sloped (3mm) | 11j (Matching surface pattern),11l (Matching surface pattern) |
 |
11l | 2x2 Sloped stud recesses - typed strong numbers | 28 / 28 | Single Cornered Narrow Bottom Edge | None | Across | Center (Bottom To Top) | Typed | Large sloped (3mm) | 11j (Matching surface pattern),11k (Matching surface pattern) |
 |
11m | 2x2 Normal stud recesses | 28 / 28 | Single Cornered Narrow Bottom Edge | None | None | Center (Bottom To Top) | Typed | Large (3mm) | |
 |
11n | 2x8 + 2x10 single pip - sloped stud recesses | 8 / 8 | Single Cornered Narrow Bottom Edge | Cross-support | Mixed | Right (Bottom To Top) | Typed | Large sloped (3mm) | |
 |
11o | 2x8 + 2x10 single pip - normal stud recesses | 8 / 8 | Single Cornered Narrow Bottom Edge | Cross-support | Mixed | Right (Bottom To Top) | Typed | Large (3mm) | |
 |
11p | 2x10 Double pip | 8 / 8 | Double Cornered Narrow Bottom Edge | Cross-support | Across | Right (Top To Bottom) | Typed | Large (3mm) | 11y (Matching patterns) |
 |
11q | 1x2 Sloped stud-recesses | 28 / 28 | Single Cornered Narrow Bottom Edge | None | Across | Center (Bottom To Top) | Typed | Large sloped (3mm) | 11r (Matching surface pattern),11s (Matching surface pattern) |
 |
11r | 1x2 Sloped+Normal stud-recess | 28 / 28 | Single Cornered Narrow Bottom Edge | None | Across | Center (Bottom To Top) | Typed | Large sloped (3mm) | 11q (Matching surface pattern),11s (Matching surface pattern) |
 |
11s | 1x2 Normal stud-recess | 28 / 28 | Single Cornered Narrow Bottom Edge | None | Across | Center (Bottom To Top) | Typed | Large (3mm) | 11q (Matching surface pattern),11r (Matching surface pattern) |
 |
11t | 1x2 Sloped stud-recesses sideways numbers | 28 / 28 | Single Cornered Narrow Bottom Edge | None | Across | Center (Bottom To Top) | Typed | Large sloped (3mm) | |
 |
11u | 2x4 Without ribs - single pip, bolder stud font | 20 / 20 | Single Cornered Narrow Bottom Edge | None | None | None | None | Large (3mm) | |
 |
11v | 2x4 Without ribs - double pip | 3 / 3 | Double Cornered Narrow Bottom Edge | None | None | None | None | Large (3mm) | |
 |
11w | 2x4 Unnumbered - normal recess | 5 / 5 | Single Cornered Narrow Bottom Edge | None | Across | None | None | Large (3mm) | |
 |
11x | 1x2 Small stud recesses | 24 / 24 | Single Cornered Narrow Bottom Edge | None | Across | Center (Top To Bottom) | Typed | Small (2-2,2mm) | |
 |
11y | 2x10 Single pip | 8 / 8 | Single Cornered Narrow Bottom Edge | Cross-support | Across | Right (Top To Bottom) | Typed | Large (3mm) | 11p (Matching patterns) |
 |
11z | 2x4 Without ribs - single pip, normal stud font | 14 / 14 | Single Cornered Narrow Bottom Edge | None | None | None | None | Large (3mm) |
12 - Tubeless - No logo inside - wide center pip (1956-1957)
| Photo | CatId | Mold | Members | InsideRibStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|
 |
12a | Serif pos. numbers - shorter pip width | 22 / 22 | Across | Large sloped (3mm) | 12b (Matching patterns - only differs by pip-witdth) |
 |
12b | Serif pos. numbers - wider pip width | 22 / 22 | Across | Large sloped (3mm) | 12a (Matching patterns - only differs by pip-witdth) |
 |
12c | SanSerif pos. numbers - mold 1 | 22 / 22 | Mixed | Large (3mm) | 12d (Matching patterns) |
 |
12d | SanSerif pos. numbers - mold 2 | 22 / 22 | Mixed | Large (3mm) | 12c (Matching patterns) |
13 - Tubeless - No logo inside - other pips (1956-1957)
| Photo | CatId | Mold | Members | PipStyle | InsideRibStyle | MoldPositionLayout | Associations |
|---|---|---|---|---|---|---|---|
 |
13a | Pip on stud | 11 / 11 | Stud | None | Left (Bottom To Top) | |
 |
13d | 2x4 Centered and mirrored numbers - centered pip | 13 / 13 | Centered Narrow Bottom Edge | Across | Center (Bottom To Top) | |
 |
13e | 2x4 Centered (but not mirrored) numbers - pip on stud | 2 / 2 | Stud | None | Center (Bottom To Top) |
19 - Other parts - logo on studs (1958-1969)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | InsideLogoOrientation | InsideLogoStyle | MoldPositionLayout | MoldPositionStyle | StudLogoStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
19A | Waffle plates with stud recess, logo underneath and stud logo bottom to top | 16 / 16 | Mixed Narrow Top Edge | Waffles | Left To Right | Dogbone | Left + Right | Typed | Wide Straight 'O' | Large (3mm) | 19B (Matching waffle pattern) |
 |
19B | Waffle plates with stud recess, logo underneath and stud logo top to bottom | 8 / 8 | Mixed Narrow Top Edge | Waffles | Left To Right | Dogbone | Left + Right | Typed | Wide Straight 'O' | Large (3mm) | 19A (Matching waffle pattern) |
 |
19C | Waffle plates with stud recess, no logo underneath and large stud recess | 20 / 20 | Mixed Narrow Top Edge | Waffles | None | None | Left + Right | Typed | Wide Straight 'O' | Large (3mm) | |
 |
19D | Waffle plates with stud recess, no logo underneath and sloped stud recess | 16 / 16 | Mixed Narrow Top Edge | Waffles | None | None | Left + Right | Typed | Wide Straight 'O' | Large sloped (3mm) | |
 |
19E | Waffle plates with stud recess, no logo underneath, 2x8 have 16 stud recesses | 1 / 1 | Mixed Narrow Top Edge | Waffles | None | None | None | None | Wide Straight 'O' | Large (3mm) | |
 |
19f | Garage Floor Plate with stud logo - no mold id | 2 / 2 | Bottom | None | Left To Right | Dogbone | None | None | Narrow Straight 'O' | None | |
 |
19l | Garage Floor Plate with stud recess - smooth bottom surface | 1 / 1 | Bottom | None | Left To Right | Dogbone | None | None | Modern | Medium (2,3-2,5mm) | |
 |
19m | Garage Floor Plate with stud recess - small circles on bottom surface | 1 / 1 | Bottom | None | Left To Right | Dogbone | None | None | Modern | Medium (2,3-2,5mm) | |
 |
19n | Garage Door Frame with studs - wide straight 'O' | 2 / 2 | Centered Narrow Bottom Edge | None | None | None | Center (Top To Bottom) | Typed | Wide Straight 'O' | None | |
 |
19o | Garage Door Frame with studs - tall wide straight 'O' | 2 / 2 | Centered Narrow Bottom Edge | None | None | None | None | None | Wide Straight 'O' | None | |
 |
19p | Garage Door Frame with studs - narrow straight 'O' - partly sloped underside | 1 / 1 | Centered Narrow Bottom Edge | None | None | None | None | None | Narrow Straight 'O' | None | |
 |
19q | Garage Door Frame with studs - narrow straight 'O' - fully sloped underside | 1 / 1 | Centered Narrow Bottom Edge | None | None | None | None | None | Narrow Straight 'O' | None | |
 |
19r | Garage Door without hinge pins | 4 / 4 | Mixed Narrow Top Edge | None | Left To Right | Dogbone | None | None | None | None | |
| 19s | Garage Door Counterweight with pin | 16 / 16 | Single Cornered Narrow Bottom Edge | None | None | None | Left + Right | Typed | None | None | ||
| 19t | Garage Door Counterweight without pin | 8 / 8 | Single Cornered Narrow Bottom Edge | None | None | None | Left + Right | Hand-written | None | None | ||
| 19u | Garage Door with hinge pins without mold pos | 2 / 2 | Mixed Narrow Top Edge | None | Left To Right | Dogbone | None | None | None | None |
20 - Old logo - 3mm stud recess - center pip (1958-1959)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | MoldPositionLayout | PatPendLayout | PatPendStyle | StudLogoStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|
| 20a | Tubes - wide pip | 19 / 19 | Centered Wide Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Top+Bottom (centered) | Normal | Wide Straight 'O' | ||
| 20b | Tubes - wide pip - rotated | 1 / 1 | Centered Wide Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Top+Bottom (centered) | Normal | Wide Straight 'O' | ||
 |
20c | 2x2 Quarter Circle #1 - heavy bottom surface structure | 3 / 3 | Centered Narrow Bottom Edge | None | Center (Circumferencial) | None | None | None | |
 |
20d | 2x2 Quarter Circle #2 - clear marks on studs | 3 / 3 | Centered Narrow Bottom Edge | None | Center (Circumferencial) | None | None | None | |
 |
20e | 2x2 Quarter Circle #3 - extensive stud recess-marks | 3 / 3 | Centered Narrow Bottom Edge | None | Center (Circumferencial) | None | None | None | |
 |
20f | 2x2 Quarter Circle #4 - tall arch above stud-notch inside wall | 3 / 3 | Centered Narrow Bottom Edge | None | Center (Circumferencial) | None | None | None | |
 |
20g | 2x2 Quarter Circle #5 - thin font / rings on studs | 3 / 3 | Centered Narrow Bottom Edge | None | Center (Circumferencial) | None | None | None | |
 |
20h | 2x2 Quarter Circle #6 - high stud notch | 3 / 3 | Centered Narrow Bottom Edge | None | Center (Circumferencial) | None | None | None | |
 |
20i | 2x2 Quarter Circle #7 - heavy structure on bottom edge | 3 / 3 | Centered Narrow Bottom Edge | None | Center (Circumferencial) | None | None | None | |
 |
20j | 2x2 Quarter Circle #8 - pattern on studs / marks on stud recesses | 3 / 3 | Centered Narrow Bottom Edge | None | Center (Circumferencial) | None | None | None | |
 |
20k | 2x2 Quarter Circle #9 - symmetric lines on outside side surface | 3 / 3 | Centered Narrow Bottom Edge | None | Center (Circumferencial) | None | None | None | |
 |
20l | 2x2 Quarter Circle #10 - no marks on studs / marks on stud recesses | 3 / 3 | Centered Narrow Bottom Edge | None | Center (Circumferencial) | None | None | None | |
 |
20m | 2x2 Quarter Circle #11 - texture on studs / bold font | 3 / 3 | Centered Narrow Bottom Edge | None | Center (Circumferencial) | None | None | None | |
 |
20n | 2x2 Quarter Circle #12 - no marks on studs / normal font | 3 / 3 | Centered Narrow Bottom Edge | None | Center (Circumferencial) | None | None | None |
21 - Old logo - 3mm stud recess - corner-pip (1958-1959)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | MoldPositionLayout | MoldPositionStyle | PatPendLayout | PatPendStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|
| 21a | 2x4 - Mold number left - pip right | 14 / 14 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Left (Bottom To Top) | Typed | Top+Bottom (centered) | Normal | ||
| 21aa | 4x4 Cornered | 8 / 8 | Single Cornered Narrow Bottom Edge | Tubes With Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21ab | 2x8 double pip right | 8 / 8 | Double Cornered Narrow Bottom Edge | Tubes With Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21ac | 2x8 double pip left | 8 / 8 | Double Cornered Narrow Bottom Edge | Tubes With Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21ad | 2x10 double pip right | 8 / 8 | Double Cornered Narrow Bottom Edge | Tubes With Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21ae | 2x10 double pip left | 8 / 8 | Double Cornered Narrow Bottom Edge | Tubes With Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
 |
21af | 1x2 - Mold #1 Stud logo along | 28 / 28 | Single Cornered Narrow Bottom Edge | None | Center (Top To Bottom) | Typed | None | None | 21ag (Matching bottom pattern) |
 |
21ag | 1x2 - Mold #1 Stud logo along - rotated | 2 / 2 | Single Cornered Narrow Bottom Edge | None | Center (Top To Bottom) | Typed | None | None | 21af (Matching bottom pattern) |
 |
21ah | 1x2 - Mold #2 Stud logo along - opposite pip positions | 28 / 28 | Single Cornered Narrow Bottom Edge | None | Center (Top To Bottom) | Typed | None | None | 23t (Matching patterns, but with different stud-sizes),23u (Matching patterns, but with different stud-sizes) |
 |
21ai | 1x2 - Mold #3 Stud logo across - without relation to gen 23 | 48 / 48 | Single Cornered Narrow Bottom Edge | None | Center (Top To Bottom) | Typed | None | None | |
 |
21aj | 1x2 - Mold #4 Stud logo across - with relation to gen 23 | 48 / 48 | Single Cornered Narrow Bottom Edge | None | Center (Top To Bottom) | Typed | None | None | 23v (Matching patterns, but with different stud-sizes),23ai (Matching patterns, but with different stud-sizes) |
 |
21ak | 1x6 Cross support Large Hole Unnumbered | 20 / 20 | Double Cornered Narrow Bottom Edge | Cross-support | None | None | None | None | |
 |
21al | 1x6 Cross support Large Hole Numbered | 12 / 12 | Double Cornered Narrow Bottom Edge | Cross-support | Left (Bottom To Top) | Typed | None | None | |
 |
21am | 1x8 Cross support Large stud recess Unnumbered | 18 / 18 | Double Cornered Narrow Bottom Edge | Cross-support | None | None | None | None | |
 |
21an | 1x8 Cross support Large stud recess Weak numbers | 12 / 12 | Double Cornered Narrow Bottom Edge | Cross-support | Left (Bottom To Top) | Typed | None | None | |
 |
21ao | 1x8 Cross support Large stud recess Bold numbers | 12 / 12 | Double Cornered Narrow Bottom Edge | Cross-support | Left (Bottom To Top) | Typed | None | None | |
| 21b | 2x4 - Mold number left - pip left | 18 / 18 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Left (Bottom To Top) | Typed | Top+Bottom (centered) | Normal | ||
| 21c | 2x4 - Mold number right - sharp edges on tubes | 20 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21d | 2x4 - Double pip | 2 / 2 | Double Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21e | 2x4 - Wide tube-base #1 | 18 / 18 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21f | 2x4 - Wide tube-base #2 | 18 / 18 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21g | 2x4 - Normal "Pat. pend." #1 | 20 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21h | 2x4 - Normal "Pat. pend." #2 | 16 / 16 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21i | 2x4 - Bold "Pat. pend." #1 | 20 / 20 | Mixed Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21j | 2x4 - Bold "Pat. pend." #2 | 20 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21k | 2x4 - Bold "pend." (normal "Pat") | 16 / 16 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21l | 2x4 - Bold "Pat." (normal "pend") | 20 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21m | 2x3 - Pip right - mold 1 | 20 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21n | 2x3 - Pip right - mold 2 | 16 / 16 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21o | 2x3 - Pip left - mold 1 (round tube edge) | 16 / 16 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | 21p (Matching bottom pattern) | |
| 21p | 2x3 - Pip left - mold 2 (sharp tube edge) | 16 / 16 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | 21o (Matching bottom pattern) | |
| 21q | 2x3 - Pip right - mold 3 (sharp tube edge 1) | 16 / 16 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21r | 2x3 - Pip right - mold 3 (sharp tube edge 2) | 16 / 16 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21s | 2x2 - Pos. left of tube | 6 / 6 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Left (Bottom To Top) | Typed | Top+Bottom (centered) | Normal | ||
| 21t | 2x2 Pip top/bottom - rounded tube edge | 22 / 22 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21u | 2x2 pip right - horizontal logo | 28 / 28 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | ||
| 21v | 2x2 pip left/right - vertical logo | 28 / 28 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | 21w (Matching bottom pattern - top rotated (pip + logo)) | |
| 21w | 2x2 pip top - horizontal logo | 1 / 1 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | 21v (Matching bottom pattern - top rotated (pip + logo)) |
22 - Old logo - 3mm stud recess - other pips (1958-1959)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
| 22a | 4x4 Cornered | 2 / 2 |
23 - Old logo - smaller stud recess - corner-pip - no mold-id (1958-1959)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | InsideRibStyle | MoldPositionLayout | MoldPositionStyle | PatPendLayout | PatPendStyle | StudLogoStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 23a | 2x4 - mold id right top to bottom - 2mm stud recess | 20 / 20 | Mixed Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | Right (Bottom To Top) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23aa | 1x2 - Mold #7 Pat. pend. ITL | 1 / 1 | Single Cornered Narrow Bottom Edge | None | Across | Center (Top To Bottom) | Typed | Right | Normal | Wide Round 'O' | Small (2-2,2mm) | ||
| 23ab | 2x4 - obscured mold id | 1 / 1 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Round 'O' | Small (2-2,2mm) | ||
 |
23ac | 1x6 Cross support Small Hole Unnumbered | 9 / 9 | Double Cornered Narrow Bottom Edge | Cross-support | None | None | None | None | None | Wide Straight 'O' | Small (2-2,2mm) | |
 |
23ad | 1x6 Cross support Small Hole Numbered Bold | 1 / 1 | Double Cornered Narrow Bottom Edge | Cross-support | None | Left (Bottom To Top) | None | None | None | Wide Straight 'O' | Small (2-2,2mm) | |
 |
23ae | 1x8 Cross support Small hole Unnumbered Short wide stud-logo | 8 / 8 | Double Cornered Narrow Bottom Edge | Cross-support | None | Left (Bottom To Top) | Typed | None | None | Wide Straight 'O' | Small (2-2,2mm) | |
 |
23af | 1x8 Cross support Small hole Numbered Rotated pos.numbers | 8 / 8 | Centered Side Surface | Cross-support | None | Left (Left To Right) | Typed | None | None | Wide Round 'O' | Small (2-2,2mm) | |
 |
23ag | 1x2 - Mold #8 Stud logo across - related to 21ai | 2 / 2 | Single Cornered Narrow Bottom Edge | None | Across | Center (Top To Bottom) | Typed | None | None | Wide Straight 'O' | Small (2-2,2mm) | |
 |
23ah | 1x2 - Mold #9 stud logo along - no mold numbers | 1 / 1 | Single Cornered Narrow Bottom Edge | None | None | None | None | None | None | Wide Straight 'O' | Small (2-2,2mm) | |
 |
23ai | 1x2 Mold #10 stud logo across - related to both 21aj and 23v | 1 / 1 | Single Cornered Narrow Bottom Edge | None | None | Center (Top To Bottom) | Typed | None | None | Wide Straight 'O' | Medium (2,3-2,5mm) | 21aj (Matching patterns, but with different stud-sizes),23v (Matching patterns, but with different stud-sizes) |
 |
23aj | 1x2 Mold #11 stud logo across - 23V with rotated logo | 3 / 3 | Single Cornered Narrow Bottom Edge | None | None | Center (Top To Bottom) | Typed | None | None | Wide Straight 'O' | Small (2-2,2mm) | |
| 23b | 2x4 - mold id right bottom to top - 2,1mm stud recess | 1 / 1 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | Right (Bottom To Top) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23c | 2x4 - mold id left top to bottom | 20 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | Left (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23d | 2x4 - mold id left bottom to top #1 | 20 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | Left (Bottom To Top) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23e | 2x4 - mold id left bottom to top #2 | 1 / 1 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | Left (Bottom To Top) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23f | 2x4 - mold id right top to bottom - small pat.pend. | 18 / 18 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Small | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23g | 2x4 - mold id right top to bottom #1 (slightly right-aligned mold.pos.) | 20 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23h | 2x4 - mold id right top to bottom #2 | 20 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23i | 2x4 - mold id right top to bottom #3 | 20 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23j | 2x4 - mold id right top to bottom #4 | 14 / 14 | Mixed Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23k | 2x3 - pip left | 16 / 16 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23l | 2x3 - pip right - weak mold pos | 20 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23m | 2x3 - pip right #2 | 18 / 18 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | 23n (Matching bottom pattern - but with smaller stud recesses) | |
| 23n | 2x3 - pip right #3 | 16 / 16 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | 23m (Matching bottom pattern - but with smaller stud recesses) | |
| 23o | 2x2 - horizontal stud-logo | 20 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23p | 2x2 - vertial stud-logo | 28 / 28 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | Right (Top To Bottom) | Typed | None | Normal | Wide Straight 'O' | Medium (2,3-2,5mm) | ||
| 23q | 2x8 | 8 / 8 | Double Cornered Narrow Bottom Edge | Tubes With Cross-support | None | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23r | 2x10 | 1 / 1 | Double Cornered Narrow Bottom Edge | Tubes With Cross-support | None | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23s | 2x2 and 2x3 - without pat.pend/mold-id | 8 / 8 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | None | None | None | None | Wide Straight 'O' | Small (2-2,2mm) | ||
 |
23t | 1x2 - Mold #1 Stud logo along - evolution from 21ah | 28 / 28 | Single Cornered Narrow Bottom Edge | None | None | Center (Top To Bottom) | Typed | None | Normal | Wide Straight 'O' | Small (2-2,2mm) | 21ah (Matching patterns, but with different stud-sizes),23u (Matching patterns, but with different stud-sizes) |
 |
23u | 1x2 - Mold #2 Stud logo along - both small and large stud recess | 1 / 1 | Single Cornered Narrow Bottom Edge | None | None | Center (Top To Bottom) | Typed | None | Normal | Wide Straight 'O' | Small (2-2,2mm) | 21ah (Matching patterns, but with different stud-sizes),23t (Matching patterns, but with different stud-sizes) |
 |
23v | 1x2 - Mold #3 Stud logo across - with relation to gen 21 | 48 / 48 | Single Cornered Narrow Bottom Edge | None | None | Center (Top To Bottom) | Typed | None | None | Wide Straight 'O' | Small (2-2,2mm) | 21aj (Matching patterns, but with different stud-sizes),23ai (Matching patterns, but with different stud-sizes) |
 |
23w | 1x2 - Mold #4 Stud logo across - without relation to gen 21 | 48 / 48 | Single Cornered Narrow Bottom Edge | None | None | Center (Top To Bottom) | Typed | None | None | Wide Straight 'O' | Small (2-2,2mm) | |
 |
23x | 1x2 - Mold #5 Stud logo across - without relation to gen 21 #2 | 11 / 11 | Single Cornered Narrow Bottom Edge | None | None | Center (Top To Bottom) | Typed | None | None | Wide Straight 'O' | Small (2-2,2mm) | |
| 23y | 2x3 Mirrored handwritten mold pos | 24 / 24 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | Right (Top To Bottom) | Hand-written | None | None | Wide Round 'O' | Small (2-2,2mm) | ||
| 23z | 1x2 - Mold #6 Stud logo across - unnumbered | 2 / 2 | Single Cornered Narrow Bottom Edge | None | None | None | None | None | Normal | Wide Round 'O' | Small (2-2,2mm) |
24 - Tall wide straight 'O' - corner pip - smaller stud recess (1958-1959)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | MoldPositionLayout | PatPendLayout | PatPendStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|
| 24a | 4x4 corner brick | 8 / 8 | Single Cornered Narrow Bottom Edge | Tubes With Cross-support | Right (Top To Bottom) | Right | Normal | ||
| 24b | 2x10 | 8 / 8 | Double Cornered Narrow Bottom Edge | Tubes Without Cross-support | Right (Top To Bottom) | Right | Normal | ||
| 24c | 2x8 double pip left - pat pend left | 8 / 8 | Double Cornered Narrow Bottom Edge | Tubes With Cross-support | Left (Bottom To Top) | Right | Normal | ||
| 24d | 2x8 double pip right - pat pend left | 8 / 8 | Double Cornered Narrow Bottom Edge | Tubes With Cross-support | Left (Bottom To Top) | Right | Normal | ||
| 24e | 2x8 double pip left - pat pend nearer center | 8 / 8 | Double Cornered Narrow Bottom Edge | Tubes With Cross-support | Left (Bottom To Top) | Left | Normal | ||
 |
24f | 1x6 Cross support Small Hole Numbered Normal Pip left Logo Bottom Up | 8 / 8 | Double Cornered Narrow Bottom Edge | Cross-support | Left (Bottom To Top) | None | None | |
 |
24g | 1x6 Cross support Small Hole Numbered Normal Pip left Logo Top Down | 8 / 8 | Double Cornered Narrow Bottom Edge | Cross-support | Left (Bottom To Top) | None | None | |
 |
24h | 1x6 Cross support Small Hole Numbered Normal Pip Right | 8 / 8 | Double Cornered Narrow Bottom Edge | Cross-support | Left (Bottom To Top) | None | None | |
 |
24i | 1x8 Cross support Small hole Unnumbered Tall wide stud-logo | 1 / 1 | Double Cornered Narrow Bottom Edge | Cross-support | Left (Bottom To Top) | None | None | |
 |
24j | 1x8 Cross support Small hole Numbered | 8 / 8 | Double Cornered Narrow Bottom Edge | Cross-support | Left (Bottom To Top) | None | None | |
 |
24k | 1x8 Cross support Small hole Numbered Rotated logo | 1 / 1 | Double Cornered Narrow Bottom Edge | Cross-support | Left (Bottom To Top) | None | None | |
 |
24l | Copy of 1x8 Cross support Small hole Numbered Glossy inside | 8 / 8 | Double Cornered Narrow Bottom Edge | Cross-support | Left (Bottom To Top) | None | None |
25 - Old logo - smaller stud recess - centered pip - no mold-id (1960-1965)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | MoldPositionLayout | PatPendLayout | PatPendStyle | StudLogoStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|
| 25a | 2x4 - horizontal stud logo | 22 / 22 | Centered Side Surface | Tubes Without Cross-support | Right (Bottom To Top) | Top+Bottom (centered) | Normal | Wide Round 'O' | ||
| 25b | 2x2 Quarter Circle | 3 / 3 | Centered Narrow Bottom Edge | None | Center (Circumferencial) | None | None | Wide Straight 'O' | ||
 |
25c | 1x6 Wide round logo | 1 / 1 | Centered Side Surface | Cross-support | Left (Bottom To Top) | None | None | None |
26 - Old logo - other pips - no mold-id (1955-1960)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
| 26a | 2x2 Quarter Circle - sloped stud recess - pip on stud | 28 / 28 |
40 - Narrow Straight 'O' without mold identifiers (1965-1970)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
40a | 1x8 | 2 / 2 |
45 - Other parts - modern logo (1960-1990)
| Photo | CatId | Mold | Members | StudLogoStyle | Associations |
|---|---|---|---|---|---|
 |
45A | Samsonite waffle plates - narrow straight logo | 1 / 1 | Narrow Straight 'O' | |
 |
45B | Samsonite waffle plates - modern logo | 5 / 5 | Modern |
90 - 90-Temp 10x20 (1962-1965)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | InsideRibStyle | MoldPositionLayout | MoldPositionStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|
 |
90a | 10x20 Normal logo - no X-shape - all studs have recess - no "700e" | 1 / 1 | Bottom | Cross-support | None | None | None | Large sloped (3mm) | |
 |
90t | 10x10 Normal logo - no X-shape - no mold id | 3 / 3 | Top Side Surface | None | Spotted | Top right corner (Left To Right) | Typed | Large (3mm) |
| Generations | Molds | MoldMembers |
|---|---|---|
| 21 | 207 | 2428 |